PLA Dotted Pattern Nonwoven 25 g (With thread and label) is a compostable, ready-to-fill woven-free corn-fibre (PLA) pyramid tea-bag roll in 25 gsm dotted fabric, pre-assembled with the thread and printed label. Certified to EN 13432, it supports plastic-free claims, holds powder and small granules without leaking, and the attached thread and tag save labelling time. Sealed by heat or ultrasonic. MOQ 6,000 pieces; label printing, thread length and tag spacing can be tailored to your brand.

PLA Poly Lactic Acid Mesh 4135 (reflex bag) is a ready-to-fill compostable fold-back / reflex pyramid tea bag in woven corn-fibre 41 mesh/cm, 26 gsm film. The self-standing reflex structure is cut and sealed ready to use, so you only add the tea and pack it. Certified biodegradable to EN 13432, it supports plastic-free claims while its transparency showcases leaf and granular tea. MOQ to be confirmed; suitable for granule and loose-leaf tea. Food-grade, BRC-certified factory.

PLA Poly Lactic Acid Mesh 4135 (pre made bag) is a ready-to-fill, single-use compostable pyramid tea bag in woven corn-fibre 41 mesh/cm, 26 gsm film. Each bag is cut, sealed and individually sized so you only add the tea and pack it — no film, no labelling, no machine needed. Certified biodegradable to EN 13432, its high transparency showcases leaf and granular tea while supporting plastic-free claims. MOQ to be confirmed; suitable for granule and loose-leaf tea. Food-grade, BRC-certified factory.

UFO Coffee Bag (paper filter) is a single-use flat-bottom 'flying-saucer' drip coffee bag, 95 x 95 mm with a 60 x 60 mm inner paper filter. The large printable top card makes it ideal for brand and promotional messaging, and the paper filter delivers a clean, smooth cup. Custom shapes and printing available. MOQ on request; food-grade filter, BRC-certified factory, 14-day lead time.

Coffee Filter U01 is a basket / flat-bottom pour-over coffee filter in unbleached or white paper, designed to sit flat in a round brewer basket for steady, even extraction. Food-grade paper that lets the true flavour of your beans through. Packed in 40 or 100 pieces. Custom printing, size and pack available. Food-grade, BRC-certified factory, 14-day lead time.

PETC Mesh 4135 is a food-grade woven low-melting polyester (PET) single-silk mesh for pyramid tea bags in 41 mesh/cm. Its lower melting point (160–180 degC) makes it easy to run with either ultrasonic or heat sealing, so it suits a broad range of tea-bag machines without costly re-tuning. Best for granule and granular tea. Sold by the metre in rolls of 800–1,200 m; MOQ 1,000 m. Food-grade, BRC-certified factory; width, thread length and tag spacing customisable.

PE/PP Dotted Pattern Nonwoven 25 g is a food-grade thermally bonded nonwoven roll (PE skin + PP core) for pyramid / triangle tea bags. The 25 gsm dotted texture holds powder, granules and small leaf with zero leakage while the PE skin heat-seals at 130 degC for fast, stable lines. It is the most economical nonwoven option in the range. Sold by the metre in rolls of 800–1,200 m; MOQ 1,000 m. Food-grade, BRC-certified factory; width, thread length and tag spacing customisable.

PE/PP Dotted Pattern Nonwoven 25 g (With thread and label) is a ready-to-fill dotted-pattern nonwoven pyramid tea-bag roll in 25 gsm, pre-assembled with the thread and printed label. It holds powder, granules and small leaf with zero leakage, the PE skin heat-seals at 130 degC, and the attached thread and tag save labelling time — the most economical ready-to-fill option. MOQ 6,000 pieces; label printing, thread length and tag spacing can be tailored to your brand.

Drip Coffee Bag (pre made bag) is a ready-to-fill 90 x 74 mm single-use hanger / drip coffee bag in dotted-pattern nonwoven, pre-cut and sealed so you only add the coffee and pack it — no machine needed. It offers DAIKI-close brew performance at a more competitive price and a full-colour printable hanger tab. A practical option for small roasters and sampling. MOQ 6,000 bags; tab size and printing customisable. Food-grade, BRC-certified factory, 14-day lead time.

Coffee Filter B01 is a bowl / round drip coffee filter, 155 mm diameter, in unbleached or white paper, made for drip coffee makers. The rounded bowl holds grounds evenly for a smooth, consistent cup. Food-grade paper that lets the true flavour of your beans through. Packed in 50 or 100 pieces. Custom printing, size and pack available. Food-grade, BRC-certified factory, 14-day lead time.

PLA Poly Lactic Acid Mesh 4135 is a food-grade, compostable woven single-silk corn-fibre mesh for pyramid / triangle tea bags in 41 mesh/cm, 26 gsm, 53-micron filament and 185-micron pore width with about 57% open ratio. Certified biodegradable to EN 13432, it supports plastic-free and sustainability claims while giving the same high transparency as nylon for showcasing leaf and granular tea. Sealed by ultrasonic or heat (130–160 degC) so it runs on either machine. Suitable for granule, loose-leaf and flower tea. Sold by the metre in rolls of 800–1,200 m; MOQ 1,000 m. Food-grade, BRC-certified factory; width, thread length and tag spacing customisable.

SMMS Hydrophilic Nonwoven 25 g is a food-grade spunbond-meltblown spunlace nonwoven roll for pyramid / triangle tea bags. The 25 gsm hydrophilic fabric wets evenly for fast, even extraction and holds fine granules and small leaf without leaking, while the non-transparent finish delivers a clean, premium package. Sealed by heat or ultrasonic. Sold by the metre in rolls of 800–1,200 m; MOQ 1,000 m. Food-grade, BRC-certified factory; width, thread length and tag spacing customisable.

Coffee Filter V01 is a conical pour-over coffee filter, 106 x 101 mm, in unbleached or white paper with a creased, self-standing wall for stable, even extraction and a fast drip. Food-grade paper that lets the true flavour of your beans through. Packed in 40 or 100 pieces. Custom printing, size and pack available. Food-grade, BRC-certified factory, 14-day lead time.

Tea Tag Roll for PA is a 20 mm food-grade tea tag roll, printed and matched to PA nylon mesh. Available in W, U or straight shapes with double-sided printing and optional gold foil. Each tag carries your brand on the finished tea bag. MOQ 6,000 pieces; size, shape, colour and artwork customisable. Food-grade, BRC-certified factory, 14-day lead time.

PETD Mesh 4135 (With thread and label) is a ready-to-fill woven polyester (PET) pyramid tea-bag roll in 41 mesh/cm, pre-assembled with the thread and printed label. The near-zero 0.0013% water-absorption film stays clean and stable, its high melting point (230–250 degC) suits high-speed ultrasonic lines, and the attached thread and tag cut your labelling time. Best for granule tea. MOQ 6,000 pieces; label printing, thread length and tag spacing can be tailored to your brand.

Drip Coffee Bag Roll is a ready-to-fill 180 x 74 mm hanger / drip coffee bag roll in dotted-pattern nonwoven with a printable hanger tab, pre-cut at 4,500 bags per roll. The bag's brew speed closely matches Japanese DAIKI quality at a more competitive price, and the tab carries your full-colour brand printing. A strong choice for roasters and coffee brands. MOQ 4,500 bags; material, tab size and printing customisable. Food-grade, BRC-certified factory, 14-day lead time.

Tea Tag Roll for PLA is a 20 mm food-grade tea tag roll, printed and matched to compostable PLA mesh. Available in W, U or straight shapes with double-sided printing and optional gold foil. Each tag carries your brand on the finished tea bag. MOQ 6,000 pieces; size, shape, colour and artwork customisable. Food-grade, BRC-certified factory, 14-day lead time.

Tea Tag Roll "tea" 20 x 20 mm for PLA is a 20 x 20 mm food-grade tea tag roll for compostable PLA mesh, featuring our standard "tea" design with double-sided printing and an optional gold-foil finish. Each tag carries your brand on the finished tea bag. MOQ 6,000 pieces; size, shape, colour and artwork customisable. Food-grade, BRC-certified factory, 14-day lead time.

UFO Coffee Bag (NWF filter) is a single-use flat-bottom 'flying-saucer' drip coffee bag, 95 x 95 mm, with a 60 x 60 mm nonwoven (NWF) inner filter. The large printable top card makes it ideal for brand and promotional messaging, while the NWF filter holds grounds cleanly. Custom shapes and printing available. MOQ on request; food-grade filter, BRC-certified factory, 14-day lead time.

Tea Tag Roll "tea" 20 x 20 mm for PA is a 20 x 20 mm food-grade tea tag roll for PA nylon mesh, featuring our standard "tea" design with double-sided printing and an optional gold-foil finish. Each tag carries your brand on the finished tea bag. MOQ 6,000 pieces; size, shape, colour and artwork customisable. Food-grade, BRC-certified factory, 14-day lead time.

Self-adhesive Sticker is a food-grade custom-printed adhesive sticker in a wide range of sizes and shapes, finished on paper or film with matte, gloss or waterproof options. Use it for product labels, seals, batch codes and branding across your tea and coffee lines. Size, shape, material and artwork fully customisable. MOQ on request; food-grade, BRC-certified factory, 14-day lead time.